WatchPAT®️ Upgrades
WatchPAT ONE
zzzPAT Installation
Full zzzPAT Installation
- Download zzzPAT using the link below (Patch to upgrade from previous versions is available as well)
- Extract the zip file and launch the “Setup” file
- Follow on-screen instruction and complete installation
Download zip file for full installation
zzzPAT Patch Installation – If Applicable
- Back-up all WatchPAT study files to a safe location
- Close zzzPAT
- Download zzzPAT patch using the link below
- Run the patch file zzPATpatch.exe
Download zip file for upgrade patch installation
Download the new Operations Manual
Click the link below to view and download the new Operations manual
WatchPAT 300
On this page, you will find helpful resources that are necessary for the proper initialization and operation of “WatchPAT™ 300”.
Step 1: zzzPAT Installation
Full zzzPAT Installation
- Download zzzPAT using the link below (Patch to upgrade from previous versions is available as well)
- Extract the zip file and launch the “Setup” file
- Follow On-screen instruction and complete installation
Download zip file for full installation
zzzPAT Patch Installation – If Applicable
- Back-up all WatchPAT study files to a safe location
- Close zzzPAT
- Download zzzPAT patch using the link below
- Run the patch file zzPATpatch.exe
Download zip file for upgrade patch installation
Step 2: USB Device Driver (FTDI) Installation
Please Note: You Must Install USB Device driver (FTDI) prior to connecting the device to the PC
- Follow the WatchPAT 300 FTDI Driver installations instruction located here
Driver location:
C:\Program Files (x86)\Itamar medical\zzzPAT\Misc\CDM21228_Setup.exe
- Run the driver installer and follow the downloaded instructions
- The WatchPAT 300 is now ready to be used
Step 3: Download the new Operations Manual
Click the link below to view and download the new Operations manual
Download WatchPAT 300 Operations Manual here – USA Version
Download WatchPAT 300 Operations Manual here – European Version
On this page, you will find helpful resources that are necessary for the proper initialization and operation of “WatchPAT™ 300”.
Step 1: Update the CloudPAT client
Existing CloudPAT users must update their CloudPAT RemotePAT (RPAT) Smart Agent using the link below:
Download CloudPAT RPAT Smart Agent installation file
New CloudPAT users can login and the CloudPAT client will be installed automatically once they interface with the device.
Step 2: USB Device Driver (FTDI) Installation
Please Note: You Must Install USB Device driver (FTDI) prior to connecting the device to the PC
- Download driver from here
- Run the driver installer and follow the downloaded instructions
- The WatchPAT 300 is now ready to be used
Step 3: Download the new Operations Manual
Download WatchPAT 300 Operations Manual here – USA Version
Download WatchPAT 300 Operations Manual here – European Version
Itamar Medical is committed to on-going quality control and to the best performance of our products.
As a quality measure, we have released an important update for the device embedded software that reduces the probability of failures.
This update is recommended, therefore we would like you to take some very simple steps in order to update your Watch-PAT300™ embedded software:
- Connect your Watch-PAT300 ™ device to the computer using the USB cable
- Click the automatic update link below
- Select ‘Run’ (and once again if a Windows publisher message appears)
- When the application opens, click ‘Setup’
- Verify that the Watch-PAT300 ™ device has been turned on after installation
Please run the automatic update here
In case your network does not enable the automatic run of the application, you can select to save it on your local file system and run it from the location it is saved to.
It is important for us that you will update your Watch-PAT300 ™ successfully. In any case, you encounter a problem please contact your Itamar Medical support center by email or phone.
Contact details can be found here.
WatchPAT 200
Watch-PAT200™ Firmware Update Instructions
Itamar Medical is committed to on-going quality control and to the best performance of our products.
As a quality measure, we have released an important update for the device embedded software that reduces the probability for failures.
This update is recommended, therefore we would like you to take some very simple steps in order to update your Watch-PAT200™ embedded software:
- Connect your Watch-PAT200 ™ device to the computer using the USB cable
- Click the automatic update link below
- Select ‘Run’ (and once again if a Windows publisher message appears)
- When the application opens, click ‘Setup’
- Verify that the Watch-PAT200 ™ device has been turned on after installation
Please run the automatic update here
In case your network does not enable the automatic run of the application, you can select to save it on your local file system and run it from the location it is saved to.
Alternatively, you can download this zip file, save it locally, extract the file and run the .exe file that is stored in the zip folder here.
It is important for us that you will update your Watch-PAT200 ™ successfully. In any case, you encounter a problem please contact your Itamar Medical support center by email or phone.
Contact details can be found here.
Click here to manually submit your update
Thank you very much for your cooperation,
Itamar Medical Customer Support
Congratulations for upgrading to the NEW WatchPAT™ Unified
Step 1: Device Firmware Upgrade
- Connect your Watch-PAT200 device to the computer using the USB cable
- Click the automatic update link below
- Select ‘Run’ (and once again if a Windows publisher message appears)
- When the application opens, click ‘Setup’
- Verify that the Watch-PAT200 device has been turned on after installation
Download zip file for off-line update here
Step 2: zzzPAT Upgrade
- Back-up all WatchPAT study files to a safe location
- Close zzzPAT
- Download zzzPAT patch using the link below
- Save the file on your computer to run it later, or run it now
Download zip file for off-line update here
Step 3: Download the new patient video
- Click the link below to view and download the new patient video
- Use this video to train patients in order to properly apply and operate the WatchPAT Unified device
Click here for the new patient video
Step 4: Download the new quick reference cards (one copy given in the upgrade package)
- Click the link below to view and download the new quick reference guide – including study checklist, patient and zzzPAT instructions
- Use these cards for day-to-day use in order to properly apply and operate the WatchPAT Unified device
On this page, you will find helpful resources that are necessary for the proper upgrade and operation of “WatchPAT200U Central+”.
Step 1: Device Firmware Upgrade
- Connect your Watch-PAT200U device to the computer using the USB cable
- Click the automatic update link below
- Select ‘Run’ (and once again if a Windows publisher message appears)
- When the application opens, click ‘Setup’
- The following screen will appear:
- Enter the sensor Serial Number as it appears on sensor cable or the sensor plastic bag label and press ‘Update’
or 
- Wait until message appears that device has been updated successfully
Run the automatic update here:
Step 2: zzzPAT Upgrade
- Back-up all WatchPAT study files to a safe location
- Close zzzPAT
- Download zzzPAT patch using the link below
- The zip file contains 3 objects: WindowsUCRT.zip, CRforVS_redist_install_32bit_13_0_21 Folder and zzPATpatch.exe
- First extract WindowsUCRT.zip (not relevant for Windows10), open document Windows UCRT ReadMe.rtf and verify which windows update component you should run according the OS you’re installing on
- Open folder CRforVS_redist_install_32bit_13_0_21 and run CRRuntime_32bit_13_0_21.msi
- Run the patch file zzPATpatch.exe
Download zip file for off-line update here
Step 3: Download the new user manual
- Click the link below to view and download the new user manual
On this page you will find helpful guidelines to label your newly upgraded “WatchPAT200U Central+” device.
Step 1:
Detach the WatchPAT200U device from its wrist strap
Step 2:
Insert the Blue plug to the designated location as shown in the image:
Note: If Tamper-Proof Bracelet is used, you may skip this step
step 3:
Place the “Central+” sticker on the device
step 4:
Attach the “Central+” strip the device carrying case
